The structure and precautions of the closed cooling tower?
2022-06-23
Jiangsu Yunuo Cooling Technology Co., Ltd. will give you a detailed introduction to the structure and precautions of the closed cooling tower?
The closed cooling tower has a better scope of application in industrial applications. What are its structures?
closed cooling tower
(1) Tower structure
During the actual combination process of the closed cooling tower, it will have some structures of its own. From the perspective of the framework, basically some of their amplitudes are defined at 0.14 mm. If viewed from the wind tunnel, the entire closed cooling tower will be Through the relevant processing of FRP materials, this kinetic energy can better recover some wind or air pipes, and can also make full use of some theories of airflow harmony, and can be combined with the time or measurement data of the project. In some practical situations, various elliptic curves are used. In this case, whether it is a curve or a straight line of other natural wind profiles, it can relatively eliminate the phenomenon of air flowing away. , which will prevent some vortex areas, there will be more negative pressure areas near the center of the airway, and even they will greatly reduce the original application area near the entire negative pressure area, and the wind speed of the outlet section should be significantly higher. more evenly.
(2) Motor
The motor of the closed cooling tower basically still has several different functions, there is an explosion-proof function and an illegal explosion-proof function, each function is also different, and can bring more energy-saving effects, The motor speed can be controlled manually or automatically through various control boxes. Relatively speaking, their motors will be more economical, and basically when the motor is actually used, there will be different application specifications, which are very easy to operate. Sensitive, three speeds can already exceed 50%.
closed cooling tower
Precautions:
(1) All contaminants in the sealed area are excluded from the outside.
(2) During the actual operation of the closed cooling tower, it is necessary to ensure that there is a sufficient clearance at the tail or other places. And basically while doing the work, it is also necessary to ensure that they are unlikely to cause a series of hazards, so try to prevent damage due to human factors as much as possible.
(3) When the closed cooling tower is actually checked, it is also necessary to check whether they are guaranteed to be on the same horizontal line.
(4) After completing the inspection operation of the closed cooling tower, there is an intermittent start switch, and it is necessary to check whether the windmill is working correctly and see if they have abnormal noise.
(5) During the actual operation or inspection process of the closed cooling tower, the hot water pan and some sundries in it must be cleaned up.
(6) Dirt removal is very important, and the relevant positions must be filled after this.
(7) Indirectly activate the circulation system of the closed cooling tower, which can completely remove the air in the pipe until the pipe or the cold water pan is filled with circulating water and stops.
(8) After the closed cooling tower is reworked, the water in the cold water pan will be adjusted slightly, and their adjustment will be adjusted according to the actual situation.
(9) You can reconfirm the circuit switch according to the circuit system of the closed cooling tower, and check whether the fuse or other wiring is appropriate.
The above is the complete content of the structure and precautions of the closed cooling tower introduced by Jiangsu Yunuo Cooling Technology Co., Ltd. for you. If you have any questions, please feel free to come and consult!
The Company is specialized in R&D, production and sales of a variety of water cooling products, such as closed cooling tower, crossflow tower, countercurrent tower, refrigerator, evaporative condenser, etc. In addition, the Company provides consulting of other relevant spare and accessory parts as well as technologies.
CONTACT：Manager Yang
ADD： No. 69-2, Beihui Road, Huishan District, Wuxi City
Wechat QR code
Copyright © 2022 Jiangsu Yunuo Cooling Technology Co., Ltd. 苏ICP备11007656号-9 Powered by www.300.cn SEO
