Points to pay attention to before the operation of the fluid cooling tower
2022-06-23
Before the closed-circuit cooling tower is operated, two preliminary tasks of inspection and cleaning should be carried out. Its operation part should be checked in detail, and it can be carried out only after there is no problem. The following Wuxi Maytech Precision Machinery Co., Ltd. will introduce to you: enter the tower through the inspection door, sort out the sundries and sludge on the bottom basin, and check whether the pipeline is blocked. Use high-pressure water to wash the heat dissipation film and the soil of the bottom basin, and discharge the sewage through the drain port.
The regular sewage discharge of the closed cooling tower mainly refers to removing the sludge, moss and corrosion products of the water receiving tray of the closed cooling tower, reducing the weight of the water receiving tray, preventing the blockage of the return water pipeline, reducing the turbidity rate of the circulating water, and strengthening the closed cooling. Tower refrigeration. It does not matter whether the water quality of the closed cooling tower is good or bad, the closed cooling tower blowdown can only temporarily sort out the obstacles in the tower, and the closed cooling tower packing and spray system have not been effectively sorted out.
The fluid cooling tower is one of many high-tech products. Its cooling effect and service life are obvious to many customers, but this does not mean that protection? Protection is not important to it. In order to improve the operating efficiency of the fluid cooler, effective protection is very important. Many users should find that, after operating a fluid cooler for a period of time, the cooling power and speed of operation are significantly different from the power at the time of original purchase. The main reasons for low fluid cooling tower power include the effect of coil fouling on heat exchange power.
Because the design of the closed cooling tower is also said to be fully enclosed, compared with the open cooling tower, we actually say that we should pay special attention to it itself. The reservoir, at the same time, the closed cooling tower can directly fill the water into the reservoir at a very large level.
Moreover, from another perspective, I think the pool at the bottom of the open cooling tower is completely visible. At this time, people actually say that a series of predictions and replenishment of the water flow in the pool should be carried out, because this , I think it is very direct for the water replenishment of the open cooling tower. However, on the other hand, for the closed cooling tower, it actually means that there is no external pool. However, it is also said that a pool will be planned at the bottom of the closed cooling tower, and there is no automatic water replenishment equipment. .
There is an air inlet grille installed on the bottom end of the closed cooling tower. Next, although it is said that there will be a pool below the grille, then we actually say that special attention should be paid to the top of the pool. In fact, it is also said that a cooling tower filler will be planned. and other related cooling components. For more companies that use closed cooling towers for the first time, how should water replenishment be carried out? First of all, we actually say that we should pay special attention to distinguishing the current water flow in the pool. According to this, from the surface layer of the closed cooling tower, the water supply line of the closed cooling tower is immediately marked. When the water volume of the closed cooling tower is less than the water level replenishment line, we should pay special attention immediately. The amount of water to expand the hydration.
The Company is specialized in R&D, production and sales of a variety of water cooling products, such as closed cooling tower, crossflow tower, countercurrent tower, refrigerator, evaporative condenser, etc. In addition, the Company provides consulting of other relevant spare and accessory parts as well as technologies.
CONTACT：Manager Yang
ADD： No. 69-2, Beihui Road, Huishan District, Wuxi City
Wechat QR code
Copyright © 2022 Jiangsu Yunuo Cooling Technology Co., Ltd. 苏ICP备11007656号-9 Powered by www.300.cn SEO
